PLA Filament Silver 1.75mm

Specification table

• Brandwanhao
• Technology3D printer

Specifications of PLA Filament Silver 1.75mm

1. Dimensional Accuracy +/- 0.02 mm 1 kg (2.2 lbs)
2. Density 1.24 g/cm3
3. Tensile strength 65 Mpa
4. tolerance 0.02mm
5. Environmental - friendly and non-toxic .
6. PLA is one of the least demanding filaments to print.
7. PLA created from processing any number of plant products and safe for use.
8. Low material shrinkage rate, uniform diameter. Nonharmful, good material toughness.
9. Used primarily in food packaging and containers.
10. Used in education, art, industry, architecture, medical etc...
11. Transparent and can be Colored to various degrees of translucency and opacity.
12. Strong, and more rigid than abs.
13. Available in different colors and translucency and glossy textures.
14. Higher maximum printing speeds, lower layer heights, and sharper printed corners.
15. PLA Filament Silver 1.75mm Made in China

Uses of PLA Filament Silver 1.75mm

• Good tensile strength, good ductility, row neatly without tangle, convenient and enough for use
• PLA Filament is one of the most widely used materials for 3D printing.
• Arrange the wire neatly and avoid printing and winding,do not add waste, printing does not crack,Good molding effect, smooth and delicate.
• Easy to use as it warps very little as it cools. Moreover, PLA emits very minimal odor.
• The retraction process entirely depends on the style of extrude the 3D printer has.
• Keeping the PLA Filament dry will ensure its non-physical damage.